Showing posts with label build a guitar. Show all posts
Showing posts with label build a guitar. Show all posts

Saturday, February 17, 2007

Another Day in Paradise.


Today was characterized primarily by time spent with my parents. With a 1:30 hair appointment, then an early dinner at Fernando's in San Mateo, it was a great day. If you are one of those people who might want to be jealous of those of us that live in California, today would be a good day to express your emotions. It was incredible out in Pacifica today, at least for a couple of hours. Everyone was out, not just the surfers. Surf's up. This photo is of Linda Mar.

This person is riding his bike backwards while sitting on the handlebars. During the hair appointment, the sun just went away, being changed to fog, leaving a bunch of people in shorts standing out in the cold. It was summer for a split second -- then it was winter again.

Here's a photo of the guitar's headstock veneer being glued into place on the neck blank. This is not the clamping technique mentioned in the book.

Here's the guitar's neck after yet another -- albeit short -- day at the project. The truss rod is now inserted into a routed slot in the neck and a tenon exists to attach to the body of the guitar. I added the Zebrawood veneer for the head and trimmed everything. I think I am about ready to carve the neck.

Nah, silly, that's my mother working a puzzle with her new do.

Sunday, February 11, 2007

Guitar Neck Construction -- Take 2


Yesterday went slightly better.

Here's the neck blank I put together yeseterday, with a Martin Style truss rod and showing the fingerboard outline. I'll need to route out the location for the truss rod and drop it into place. Then I suppose I can start to convince it to look a bit more like a guitar neck.

Monday, February 5, 2007

Guitar Neck Fabrication



This is the first attempt at the neck fabrication for the guitar. At this point it is still going very well. This is a piece of Honduran mahogany just before being reduced to scrap cut at 15 degrees with a dozuki and then planed to match. I'll be doing this part again next week though, as I learned an important lesson in paying attention, later in the day.

Wednesday, January 24, 2007

ooooh!


Stuff came in boxes today. I bet there was a time in the not too distant past when a Luthier had to spend quite a bit of time aquiring and drying appropriate woods for his craft.

The internet speeds that process up a bit. So does fedex.

The picture above shows the better parts of the skinny end of a guitar. Clockwise from the top left: wicker trunk, ebony fingerboard, Honduran mahogany neck stock, adjustable truss rod, more Honduran mahogany, racoon, remote, mahogany heel block, gold tuning machines, zebrawood head veneer.

That means that there's work to do. Before that, however, I am going to try out Fritz' Grandmother's miso soup recipe. But first I have to find some Niboshi Dashi. Or whatever that was that his grandmother had on the wall in her kitchen. There's a bonus venison onion soup recipe in the comments.

Sunday, January 21, 2007

Guitar Project

I have a long and serious relationship with wood. Being a Sculptor -- I learned early on to appreciate its virtues. I have pieces of ebony and walnut and purpleheart and bloodwood lying around in my house, my studio, in my sculpture. In my living room is a table I built from Port Orford cedar and zebrawood. I walked in to my local hardwood supplier (I bet you all have one) and talked to a young guy for a while about Honduran mahogany. I bought a single small piece of rosewood.

The old man walked in while I was paying my bill, and said ... "How you been?" I said -- "I am good, how about you? ." He remembered me from God knows when. 1997. He hasn't aged a day. I bought a lot of wood from him when I was trying to get through grad school.

When I buy a piece of wood I tap on it, test it, check its worthyness. I listen to it. I look at it -- Is it gorgeous or just crap. I want to know that it's a sweet piece.

Over the last few days I have bought a variety of stuff. Tuning machines. Honduran mahogany stock for necks, the rosewood mentioned above, an already cut for frets fingerboard in the Martin length, and ebony, fretwire, a zebrawood plate for the tuning pegs. Ivory. A readymade tensioner for an acoustic guitar. A spokeshave. I never got to tap on any of it. I'll have to check it out when it gets here.

I am thinking -- a 1964 gibson acoustic might be cheaper ...

I said to that kid -- that piece is flatsawn. I need a quartersawn piece, do you have one. No. Thanks. Bye. Gotta go.

Wednesday, January 17, 2007

Early Guitar Project


... hmmm... well, it's started. I am reminded of the time two of my neighbors were talking once in the street in Hayward and I could hear them, because of a peculiar twist of the wind.

"What do you think our crazy neighbor is up to today?"
"You don't suppose he's going to cook up a boiling, smoky, oil filled cauldon out in the
driveway today?"
"Hard to say. He's probably going to wait till dark to do that, don't ya think?."
"Hmm, yeah."

This of course, was the day after I mixed a 20 gallon batch of oil-based clay in a drum over an open fire in my driveway. It started on the coleman stove, and then briquets and sticks, and then bark and firewood. It takes quite a bit of fuel to melt 20lbs of wax. Looking back ...

One of my friends gave me the strangest look the other day when I was describing the guitar project. It's clear that some people think this is an interesting project. Too interesting. It was one of those "you actually make baskets?" sort of looks.

The image above is a 1.5 inch thick workboard with a paper pattern and guitar shaped gasket (the shim) and "shoe," ultimately to hold and assembly the guitar. The next step is to layout the strings and neck, but let's just say, I am making some progress.

Saturday, January 13, 2007

Buying a Guitar Really Might be Easier

So now -- I've read the faq here. and I've read two books on the subject. Since I am now into it more that it would take to buy an acoustic guitar, it seems that I have again chosen the harder less travelled path. I haven't memorized them yet, but I did read Guitarmaking, Tradition and Technology, by William D. Cumpiano and Jonathan D. Natelson and The Guitar Masters Workshop, by Rik Middleton, which I didn't like because he calls clamping "cramping" and a c-clamp a "G-cramp". That troubles me. I am not sure what a G-cramp is, but I think it might have to do with not having sex during pregnancy. I shouldn't be so irreverant of someone skilled enough to make a guitar. The book was quite informative. It primarily talks about making a classical guitar. Later, when I have taught my self to play Flamenco -- I will be more interested in classical guitars.

Now, I am sure you are wondering what has possesed me to think I should build a guitar. I once read a detailed description of how to build a violin and it was quite facinating. Right now I am shopping around for that thing that is going to carry me emotionally and financially through the next 20 or so years of my life and it seems that making something with craft, tradition. and history, could be a cool place to start. I have the kind of patience, hands, and intent, to do quite well at something so simple and sophisticated.

I considered some other things, like being a bum, or just getting paid to travel.

I have a great piece of Port Orford Cedar which is just an inch or so too small to make a guitar soundboard ... so I think I am going to need to buy some spruce. Tomorrow -- I will do what I always do when starting a project. Clean up and collect the tools in one place.

After I go for a nice long ride.

Friday, January 5, 2007

Notes on Making a Guitar

[Air guitar playing]
I walked 47 miles of bobwire
I got a cobra snake for a necktie
A brand new house on the roadside
and its made out of rattlesnake hide
Gat a brand new chimney made to fit on top
and it's made outta human skulls
Com'on take a little walk with me baby
And tell me who do you love ...
Now around the town I
Use a rattlesnake whip ...

Around noon today I set out across the soccer field after eating a bowl of miso soup, butteryaki somethingfish, and about a pound of rice, when I realized that the internal furnace was kickin in. I was hot. It was still bitter wind winter San Francisco California freezing, but I was feeling normal.

This has happened to me before, like the time I decided to put cream in my coffee. I was a grad student in Eastern Washington, and I got up one morning and it was 15 degrees out (the day before it was like 47) ... and there was snow on the ground. I walked across town and froze. And decided to start putting cream in my coffee to add some fat in my diet. I had already started putting the cream in my coffee, when a couple of days later -- I suddenly got warm. I stayed warm until March when it started to rain.

Yes, I was overdressed. Yes, I wasn't all tucked in in the right places. Yes, I left my Goretex™ windbreaker and jacket™ at home. Yes, I was getting sweaty. And I wasn't even playing soccer. Just burning rice and evolving. Just surviving.

Darwin was right... Here's to evolution.

As a sculptor, I occasional get these bright ideas to build things. I was looking at a piece of sculpture I made a few years ago (It's made from the arm of a chair and invokes the image of a violin) and thinking about my son and a guy named Tim Doebler and what was so special about Stratovarious anyway. I never really cared for Tim's ironwork, but he often made these sardine can mandolins, and other weird and unique string instruments, which I thought were brilliant. I hear a Stratovarios™ is actually brilliant.

So there I was, remembering the book I read about building a violin, and thinking how I never managed to get that boat I built all those years ago to float -- how I never built that wood canoe ... and I was thinking that I would never manage to build a guitar. Then I remembered that I know how to do that. I have an advanced degree in building stuff. SO I went to the bookstore and the big library in sky.

Tomorrow I am going to look for some wood.

Then, I'll start to make notes about building a guitar.